How to Clean An Air Hockey Table The Easy Way

If y'all've finally decided to take the plunge and buy the best air hockey table for kids, then chances are you've spent a lot of coin and y'all want to make certain your table lasts.

Our guide on how to clean an air hockey table will give you some great tips on how to keep the surface clean and free of debris, for an ultimate gaming experience. Nosotros'll besides get over basic care and what you can do to keep your table looking new.

Fundamental Takeaway: You don't have to devote a lot of fourth dimension to deep cleaning your air hockey table regularly. Instead, focus on keeping the playing surface free of gunk, dust, and debris. For even the best air hockey tables, a dirty playing surface can have a major negative impact on your playing experience. Deep cleans should be done every ii months or depending on how frequently the tabular array is used.

Keeping it Make clean

If you take care of your air hockey table, there's no reason it can't last for years. In fact, a well-built model like the Hathaway BG1157M Rapid Fire can fifty-fifty survive your kids, if yous properly maintain it and go on the playing surface clean and dirt and grime-gratuitous.

Fortunately, cleaning an air hockey tabular array is pretty easy, especially if you routinely wipe downwardly the playing surface.

When to Clean Your Air Hockey Table

And then, why do air hockey tables need to exist cleaned? One of the biggest reasons is because a table that's dingy can seriously hinder gameplay. A dingy playing surface will slow down the puck and tin make information technology difficult to make sure shots. When a lot of clay or dust accumulates on the playing surface it tin even clog upwards the holes on the table, causing what are referred to as expressionless spots. In these dead spots, air is not able to make its way through the dirt and grime. This means when you shoot a puck over one of these areas the puck may cease in its tracks or significantly slow downward, ruining a keen shot.

If in that location is dirt, debris, or another type of substance on the surface information technology tin cause the puck to jump, buck, or slide in the incorrect direction. This can exist very frustrating for players. Even worse, information technology can also stop up damaging the surface of the tabular array causing nicks and chips. If this happens, even a regular deep clean won't assist to improve gameplay.

In social club to avoid this issue, the playing surface should be cleaned right before and later on use. Routine maintenance should exist washed once a week. If you only utilise the tabular array once in a blue moon and then yous should exercise a deep clean before adding a cover and another deep clean when yous pull the tabular array out of storage. A typical deep clean should be done every couple of months.

Click hither to cheque out some of the all-time 4-role player round air hockey tables!

Switching On the Blowers

Before y'all start cleaning the table, make sure you switch on the blowers. This will aid preclude any of the dirt and grime from settling into whatsoever of the holes on the tabular array's surface.  Brand certain you advisedly go over the surface using a light affect in lodge to avert damaging the surface of the table with the nozzle attachment.

Wipe Down the Playing Surface

Wipe Down the Playing Surface

After the table has been vacuumed, use a soft, clean cloth to wipe down the playing surface. We recommend using a soft cotton or microfiber fabric.

We also recommend using the same textile to wipe downward the sides of the table. Some hockey table players will tell yous to avoid this pace since many feel that a modest amount of dust tin assist when making a bank shot. Basically, this is a personal pick. We recommend wiping down the sides of the table but considering the same dust can travel to the table'south surface, potentially clogging the holes in the playing surface.

Clogged Holes

One of these biggest issues that can negatively impact your playing experience is clogged holes throughout the playing surface. Fortunately, this is an easy fix, although if your table has never been cleaned before, it can be a very lengthy process.

If your tabular array has many clogged holes in the playing surface then yous'll need to exercise a deep make clean. Most deep cleans can involve polishing afterwards cleaning the playing surface, the sides of the table, and the legs. But information technology will also include cleaning out the holes in the table. Fortunately, cleaning the holes out is an easy prepare, although, if your table is pretty filthy then this footstep can be time-consuming.

To do, you'll need to use a toothpick to carefully poke through each of the clogged holes. Another option is to apply a drill chip. E'er remember to keep the blowers going to aid dislodge the holes and remove the gunk from the surface of the table.

Approved Cleaning Products

Some air hockey table owners are totally against using any type of chemic to make clean their tables. These people will stick to a damp textile only, while other owners prefer to use cleansers that are alcohol-based, or mutual piece of furniture polishes, window cleaner that's ammonia free, and dish detergent such equally Dawn. Whichever product you make up one's mind to use, make sure you thoroughly dry out the table once you've removed all the dirt and grime. You should also make sure you don't soak the surface of the table with chemicals. Residue can get caught in the holes of the playing surface and plow into a sticky gunky surface, bottleneck the holes and hindering gameplay. Because of this, nosotros recommend dipping a microfiber cloth in warm water and going over the surface of the table later you've used a cleanser. This volition remove whatever remaining cleanser or dish detergent.

During this footstep, it's very important that you're careful regarding the amount of pressure you use to wipe downward the surface. However, you also accept to ensure you remove whatsoever gunk from the surface, which can require using more pressure. Again, it'southward important to brand sure that you never use a type of abrasive cleaner on the table's surface in order to prevent scratches.

Waxing Your Air Hockey Table

While information technology'south not required, many air hockey tabular array owners will wax the surface of the table during a deep clean. Even though it'due south not a requirement, information technology tin really work to assistance retain a smoothen surface and tin make even an older table look brand new. The purpose of waxing the surface is twofold: first, it smooths out a roughened or age-worn table, and it protects the table's surface from hereafter damage.

If you decide to go ahead and wax the playing surface, brand sure you lot use a minor amount of wax and don't go overboard. Use wax that's specifically designed for air hockey tables and utilise an even, sparse coat, covering the unabridged surface. A thin layer will do a great chore of smoothing out the surface of the table, but if you make the error of applying too much wax you tin end up bottleneck some of the air holes, creating dead spots.

After y'all have applied the thin layer of wax, once the wax dries wipe downwardly the surface of the table using a dry, clean cloth to buff out the wax. This will produce a glossy, shiny surface.

  • The Best Tabletop Air Hockey Tables – Height Models for 2022!

Cutting Downward on Cleanup

If yous don't accept fourth dimension to wipe your table down before and afterwards a game, or you want to cut down on the amount of clay and grit that builds up on the table's surface, an air hockey tabular array cover is a great solution. The cover will help to keep the playing surface dust-complimentary and clean until you're ready to apply information technology again. It tin also preserve the table. Additionally, make certain that yous make clean the strikers and pucks when you're cleaning the table. Yous'd be surprised to acquire how much gunk and crud both the pucks and strikers tend to pick up over time. The last thing you want to exercise is innovate dingy pucks and strikers to a freshly polished table.

The felt pads on some strikers can concenter dirt and wear downward over time. If these pieces get really grimy, it'southward fourth dimension to replace them.

To learn more nearly air hockey tables, how to determine what size to go, and other interesting air hockey table facts, click here to read our article on air hockey table dimensions.

Final Thoughts

How to clean an air hockey table can be tricky in the beginning, especially if you lot've had your tabular array for months and have never cleaned it. Following our cleaning instructions and keeping up on air hockey table maintenance will extend the life of your table and can keep information technology looking brand new. Yous may demand to do a little experimenting in terms of what cleansers to use, or whether a polish will help to ameliorate a puck's functioning. With proper upkeep, you should just take to do a major deep clean one time every ii months.

Summary

How to Clean An Air Hockey Table The Easy Way

Article Name

How to Make clean An Air Hockey Table The Easy Way

Description

Cheque out our tips that will have your air hockey looking brand new in no fourth dimension. These cleaning tips can also significantly amend your gaming experience.

Author

Air Hockey Geek.com